Disable the SRS before servicing the emergency tensioner modules (see chapter Onboard electrical equipment). The wiring of the SRS circuit is easy to distinguish by the yellow color of the insulation!
1. Disconnect the negative cable from the battery. Wait at least one minute for the SRS self-contained power supply capacitor to discharge before proceeding with the work ahead.
2. Remove the front seat (see Removal and installation of front seats).
3. Disconnect the harness from the emergency belt tensioner module from the seat base.
4. Turn out a fixing bolt and remove a tensioner from a forward seat.
5. Installation is carried out in the reverse order. Before screwing in the fixing bolt, lubricate its threaded part with an anaerobic fixing sealant. Make sure the bolt is tightened to the correct torque.
Visitor comments