Steering gear — removal and installation

1. Set the wheels to the straight ahead position. Remove the ignition key from the lock.

2. Remove the subframe (see above).

3. Remove the rear engine mount bracket from the subframe.

4. On parts of cars, unscrew the bolts and remove the hydraulic booster tubes from the subframe (see photo).



5. Turn away nuts of unions and disconnect tubes from the steering mechanism.

6. Mark the route and remove the electric pump wiring from the subframe.

7. Turn away nuts and remove the electric pump from the steering mechanism together with a nutritious tank and tubes.

8. Turn away bolts and remove the steering mechanism (see photo). If necessary remove steering drafts and tips and replace rubber covers.



9. Installation is carried out in the reverse order.