Note: It is recommended to entrust this operation to car service specialists.
1. If necessary, raise the car on a lift.
2. Turn the lid (see resist. illustration) on the back of the fog lamp counterclockwise and remove it. Then release the spring clip from the holders, disconnect the wiring connector and remove the lamp.
3. Replace the lamp and connect the electrical wiring connector, install the lamp in the socket and, holding it with your finger, secure the wire spring clip in the holders with the other hand.
4. Reinstall the lamp cover, lower the vehicle and check for proper lamp operation.
Features of Zafira models
5. Remove the front bumper cover (see chapter 11).
6. Disconnect the fog lamp wiring connector (see resist. illustration), remove the 3 mounting bolts on the back of the bumper cover and remove the fog lamp.
7. To replace the lamp, turn the cover (see illustration 17.6) counterclockwise and remove it.
Visitor comments