Attention: Ashtrays must not be used only for collecting ashes, do not put flammable objects in them!
The ashtray and cigarette lighter assembly for the driver and front passenger is mounted in the lower part of the console section of the instrument panel below the control panel of the ventilation, heating and air conditioning systems (see illustrations 15.1, 17.22) and covered with a decorative lid.
To open the lid, you need to press it in the marked place - access to the ashtray and cigarette lighter will open.
The ashtray is closed by pressing the decorative panel until it clicks. The ashtray is cleaned after removing its tray, for which you need to pull it up (see illustration 17.23) Disconnect the wiring connectors from the back of the ashtray tray.
To the right of the ashtray, a cigarette lighter is mounted in the console panel (see illustration 17.26). The cigarette lighter can be activated in any position of the key in the ignition switch. To activate the cigarette lighter, simply press its button into the socket until it stops - after the heating element has finished heating, the button will automatically jump out to its original position.
Attention: Never hold the cigarette lighter button in the pressed position by force!
If the cigarette lighter button after pressing does not pop up for a long time, the car should be driven to a service station to eliminate the existing malfunction. After use, do not forget to return the button to the socket (to avoid contamination of the). The cigarette lighter socket can be used to connect additional power consumers designed for a voltage of 12 V and a power consumption of not more than 120 W.
For rear passengers, the ashtray is built into the end wall of the center console (see illustration 17.24) To use the ashtray, you must press one of the sides of the decorative panel and move it to the position for use. To clean the ashtray, press the spring clip (see illustration 17.25) and remove the ashtray from the mounting socket.
Visitor comments