Note: On models equipped with air conditioning, simple dust filters are installed, on cars without an A/C system, filters with carbon filling are installed. When replacing a new filter element, it must match the brand with the one being replaced.
2. To remove the filter element (see resist. illustrations) first unscrew 4 bolts and remove the glove box, do not forget to disconnect the wiring connector. If equipped, remove the decorative cover of the center console on the side of the front passenger's footwell (see chapter 11). Remove the air supply hose to the passenger footwell by removing the retainer. Unscrew the 3 bolts securing the service cover, remove the cover and remove the filter.
19.2 How to remove the cabin filter
1 Main glove box mounting bolts
2 Retainer
3 Bolts of fastening of the top decorative panel
4 Service cover bolts
5 Service cover
6 Replacement filter
3. Installation is carried out in the reverse order.
Note: When installing a new filter element, pay attention to which side it should be installed forward - see the instructions that came with the filter.
Visitor comments