Specifications

Common parameters

Main performance characteristics

Cylinder Arrangement // Ignition Order

Inline // 1-3-4-2 (the first cylinder is located on the timing side)

Normal direction of rotation of the crankshaft

Clockwise

Compression pressure

Gasoline engines

• Rated value (all engines covered in the Guide), bar — 12+15

Diesel engines

• Rated value (all engines covered in the Guide), bar - 30 + 35

Maximum allowable pressure difference between cylinders (all engines covered in the Guide), bar - 1

Valve clearances (only for specified engines)

Valve clearance values, mm

Cylinder head

Cylinder Head Gasket Dimensions (motors Z17DTL/H)

Tightening force of threaded connections, Nm

All engines

Front subframe mounting bolts - 90 Nm + 45°+ 15°

Power unit suspension mounts

Left support

• Carrier bracket to adapter bolts - 55
• Bolts of fastening of a support to an arm - 55
• Bolts of fastening of a support to a body — 20
• Bracket to adapter bolts - 35

front support

• Bolt of fastening of a support to a body — 55

Rear support

• Bolts of fastening of a support to an arm - 55
• Bolts of fastening of a support to a stretcher — 55
• Bolts of fastening of an arm to a case of transmission — 60

Right support

• Bolts of fastening of a support to an arm - 55
• Bolts of fastening of a support to a body — 35

Z16XEP engine

Nuts of fastening of a final collector — 22

Bolts of fastening of an arm of the right support of the engine

• To the cylinder head - 18
• To the cylinder block - 20

Camshaft gear bolts - 50 Nm + 60°+ 15°

Bolts of fastening of the top covers of camshafts — 8

Bolt of fastening of the tension device of a multirib belt - 50

Bolt of fastening of a tension roller of a toothed belt — 20

Bolt of fastening of the directing roller of a gear belt — 25


Crankshaft pulley bolts - 95 Nm + 30°+ 15°

Cylinder head bolts - 25 Nm + 90°+ 90°°+ 90°+ 45°

Bolts of fastening of a cover of a head of cylinders — 8

Bolts of fastening of covers of a gear belt — 6

Cylinder head oil pressure sensor (with appropriate equipment) — 20

Bolts of fastening of the case of the oil pump — 20

Bolts of fastening of the pallet crankcase to the block of cylinders — 10

Bolts of fastening of the oil pan to the transmission assembly - 40

Bolt of fastening of a transport earring of the engine — 25

Bolts of fastening of a branch pipe of the engine cooling system - 10

Alternator mounting bolts - 35

Z18XE engine

Engine Cover Mounting Screws - 8

Bolts of fastening of an arm of the right support of the engine to the block of cylinders — 65 Nm + 45°+ 15°

Mounting bolts / exhaust manifold nuts - 20

Bolts of fastening of an inlet air duct to a head of cylinders — 20

Camshaft gear bolts - 50 Nm +60°+15°

Bolts of fastening of the top covers of camshafts — 10

Bolts for fastening the tensioner of the multirib belt - 35

Bolts of fastening of a tension roller of a toothed belt — 20

Bolts of fastening of directing rollers of a gear belt — 25

Crankshaft pulley bolts - 95 Nm + 45°+ 15°

Cylinder head bolts - 25 Nm + 90°+90°+ 90°+ 45°

Bolts of fastening of a cover of a head of cylinders — 8

Bolts of fastening of a back cover of a gear belt — 6

Bolts of fastening of forward covers of a gear belt — 4

Bolts of fastening the gauge of camshafts — 8

Bolts of fastening of the case of the oil pump — 10


Bolts for fastening the oil pan to the cylinder block and oil pump - 10

Bolts of fastening of the oil pan to the transmission assembly - 40

Bolt of fastening of a transport earring of the engine — 25

Oil intake bolts - 8

Union nut for fastening the fuel line to the fuel distribution line - 15

Z14XEP engine

Camshaft sprocket bolts - 50 Nm + 60°

Bolts of fastening of an arm of the right support of the engine to the block of cylinders — 50

Bolts of fastening of the top covers of camshafts — 8

Bolt of fastening of the gauge of camshafts — 6

Chain guide bolts

• Chain tensioner side guide - 20
• The rest - 8

Cylinder head fixing bolts - 25 Nm + 60°+ 60°+ 60°

Fixing bolts of a cover of a head of cylinders — 8

Bolt of fastening of the tension device of a multirib belt

• Bolts M8 - 20
• Bolts M10 - 55

Crankshaft pulley flange bolt - 150 Nm + 45°

Bolts of fastening of a pulley of a cranked shaft — 8

Timing chain cover bolts

• Bolts M6 - 8
• Bolts M10 - 35

Bolts of fastening of the case of the oil pump — 8

Bolts of fastening of the case of the oil filter — 20

Bolts of fastening of the pallet crankcase to the block of cylinders 10

Bolts of fastening of the oil pan to the transmission assembly - 40

Bolt of fastening of a transport earring of the engine — 20

Chain tensioner access cover - 50

Z20LE engine (L/R/H)

Bolts of fastening of an arm of the right support of the engine — 50

Bolts for fastening the tensioner of the multirib belt - 25

Timing drive gear bolt - 130 Nm + 45°±5°


Bolts of fastening of a pulley of a cranked shaft — 20

Bolts of fastening of a tension roller of a toothed belt — 20

Bolts of fastening of directing rollers of a gear belt — 25

Camshaft gear bolts - 50 Nm + 60°+ 15°

Bolts of fastening of the top covers of camshafts — 8

Cylinder head bolts - 25 Nm + 90°+ 90°+ 90°+ 15°

Bolts of fastening of a cover of a head of cylinders — 8

Bolts of fastening of covers of a gear belt — 6

Oil intake bolts

• To the oil pump - 8
• To the block of balancing shafts - 10

Bolts for fastening the upper part of the oil pan to the cylinder block and oil pump - 20

Bolts of fastening of the oil pan to the transmission assembly - 40

Bolts for fastening the lower part of the oil pan - 8 Nm + 30°

Bolts of fastening of the case of the oil pump — 8

Oil cooler housing - 35

Camshaft sensor - 6

Engine Z17DTL/H

Bolts of fastening of an arm of the right support of the engine — 50

Upper and lower sump mounting bolts - 10

Exhaust manifold nuts - 69

Bolt of fastening of a cogwheel of camshafts — 64

Bolt of fastening of a tension roller of a toothed belt — 49

Bolt of fastening of the drive gear of the timing drive - 196

Bolts of fastening of a pulley of a cranked shaft — 20

Cylinder head fixing bolts 40 Nm+60°+60°

Bolts of fastening of the case of camshafts

• Bolts M8 - 21.6
• Bolts M10 - 26.5

Bolts of fastening of a cover of the case of camshafts — 10

Bolts of fastening of covers of a gear belt — 10

Bolt of fastening of the gauge of camshafts — 10

Bolts of fastening of the case of the oil pump — 10

Bolt of fastening of a leading cogwheel of a drive of the oil pump — 196

Bolts of fastening of the pallet of the top and lower parts of the pallet of a crankcase — 10

Bolts of fastening of a pulley of the water pump of system of cooling — 44.1

Z19DT engine (H)

Bolts of fastening of an arm of the right support of the engine — 50

Engine cover bolts - 9

Bolts of fastening of a tension roller of a multirib belt — 50

Bolts of fastening of the directing roller of a multirib belt (top roller) — 50

Bolts of fastening of a tension roller of a toothed belt — 25

Bolts of fastening of a pulley of a cranked shaft — 25

Cylinder head bolts - 20 Nm + 65 Nm + 90°+ 90°+ 90°

Bolts of fastening of covers of a gear belt

• 4 top bolts - 9
• 2 bottom bolts - 25

Oil pump mounting bolts - 9

Mounting bolts of the camshaft housing cover - 10

Z13DTH engine

Cylinder head fixing bolts 40 Nm + 90°+ 90°

Z22YH engine

Cylinder head fixing bolts - 30 Nm + 75°+ 75°+ 15