Replacement of brake pipes

Connections of tubes with all units of the brake system and hoses, as well as the principles of their replacement, are the same.



1. To replace any tube, unscrew the nut that secures the tube to the hose end..



2.... or to the brake system assembly (for example, to the hydro-electronic block of the anti-lock system) …



3.... remove the tube from the holders on the body and remove it.

Note. The photo for item 3 shows the location on the base of the body of the holders of the brake pipes from the hydro-electronic block of the anti-lock braking system to the brake mechanisms of the rear wheels. For other tubes, similar holders may be positioned differently.

4. Install the new tube in the reverse order of removal.

5. After replacing the tube, bleed the air from the brake system (see Bleeding the hydraulic drive of the brake system).