The air from the fuel path should be removed in the event that the power supply system was opened or the fuel tank was emptied while the vehicle was moving.
1. Check for fuel in the tank.
2. Start the engine. After 10 seconds, take a break for 5 seconds. When starting, the air from the fuel path is removed by itself.
3. After starting, let the engine run for about 30 seconds at high speed. In this case, the air from the fuel path is completely removed.
4. If the engine does not start due to the formation of an air lock in the fuel path, loosen the union nut of injector 1 or 4 and turn on the starter so that fuel comes out. After that, tighten the nuts again and start the engine.
Loosening the union nut of the injector
Be careful not to get fuel on the hoses. Otherwise, wipe it off immediately. Replace damaged hoses.
Visitor comments