Automatic car gearbox Opel Corsa C (petrol)

General information about automatic transmission
The automatic transmission performs the functions of smooth engagement of the clutch when starting off and optimal gear shifting when the vehicle is in motion....

Torque converter — general information
Various torque converters are installed on Opel cars. All of them have a marking on the end, which indicates the compatibility of the transformer with a...

Main gear — general information
The gearbox converts the engine torque, which is transmitted further through the small and large gears of the final drive. The large gear is fixed in the final...

Adjustment of a cable of the selector of switching of automatic transmission
Raise and place the car on stands or over a viewing hole. Selector set to position «R». Press the selector cable spherical support upwards from the shift axis....

Automatic transmission designation (AF 13-II)
The type plate of the AF-13-II gearbox is located on the top side of the gearbox. Transmission oil (AF13-II) Instructions for checking the safety functions of...

Checking the condition of the transmission oil (AF13-II)
Checking the color and odor of the automatic transmission oil provides a first indication of the condition of the mechanical components of the automatic...

Oil pressure test (AF13-II)
Attention! Eliminate control malfunctions. When checking with a full load, pull the parking brake lever and depress the brake pedal. Due to the risk of...

Checking the position switch of the gear lever (AF13-II)
Remove the harness connector holder 2. Disconnect the shift lever position switch harness connector 1. Disconnect the shift lever position switch harness...

Unlocking the stopper of the gear lever in case of violation of its operation
Note. If with a longer parking time of the car (e.g. during the night) gear lever will not be in position «R», the battery may be drained. To prevent the...

Shift Lever Position Switch Adjustment (AF13-II)
Remove the harness connector holder 2. Loosen and disconnect the shift lever position switch harness connector 1. Squeeze out from the control lever a cable of...

Adjustment of the cable system of the gear shift drive (AF13-II)
Checking the adjustment of the cable system of the gear shift drive Move the shift lever sequentially to position P, R, N, D, 3, 2, 1. At the same time, press...

Replacing the shift cable system (AF13-II)
Remove the middle console. Lay cable duct 1 aside. Unfasten the cable duct. Squeeze out from the control lever a cable of a drive of a gear change 3. Release...

Replacement of the switch of the locking device of the gear lever
Remove the shift lever assembly. Remove cable ties 3. Remove ground wire (arrow) from the grounding distribution block. Disconnect the harness connector 4 of...

Replacing the Wiring Harness in the Shift Lever Assembly (AF13-II)
Remove the middle console. Remove the shift lever assembly. Unfasten the insert of the automatic console block (arrows) and pull up. Remove the bulbs with...

Replacing the control unit of the electronic gearshift switch
Note. When replacing the control unit, reset the data with the TECH2 device before dismantling. Disconnect the battery clamps. Release and disconnect wire...

Replacing the glow lamp of the gearshift indicator in the gear lever console (AF 13-II)
Remove the middle console. Unfasten the insert of the automatic console block (arrows) and pull up. Remove the bulbs with socket from the insert of the...