Door replacement

1. Disconnect the door electrical connector.

2. Support the door with a jack, then unscrew the bolt (1) front door stop.

Note. Tightening torque: 22 Nm.

3. Loosen the bolt (2) fastening the upper door hinge to the body.

Note. Tightening torque: 25 Nm.

4. Remove two screws (3) lower door hinge to the body.

Note. Tightening torque: 25 Nm.

5. With the help of an assistant, remove the door (4).

Note. If the door is to be replaced, rearrange the necessary parts from the old to the new door.

6. Installation is made in an order, the return to removal.