Sedan/hatchback
Release the latch and remove the cover.
Unscrew the two plastic fastening nuts from the inside by hand.
Remove the rear light assembly.
Make sure the wiring harness stays in place.
Disconnect the harness connector from the lamp socket.
Unscrew the screws and remove the cartridge.
1. Tail light/brake light.
2. Direction indicator.
3. Rear light.
4. Reversing lamp / rear fog lamp.
Slightly push the lamp socket into the socket, turn counterclockwise, remove and replace the lamp,
Insert the bulb holder into the rear light and secure it with screws. Connect the harness connector. Establish a back lantern on a body and tighten nuts of fastening. Install the cover and lock the latch.
Turn on the ignition, turn on all the lights and check their operation.
Station wagon
Loosen and open the cover in the rear door.
Loosen the three plastic fixing nuts by hand.
Remove the rear light assembly.
Make sure the wiring harness stays in place. Disconnect the harness connector from the lamp socket.
The rear lights have two lamps. To replace one of the bulbs, turn the plastic nut (1) counterclockwise and remove the bulb from the socket. Slightly push the lamp socket into the socket, turn counterclockwise, remove and replace the lamp. Install the plastic nut on the lamp holder and turn it clockwise.
To replace other lamps, unscrew: the screws and remove the lamp holder.
1. Rear light.
2. Direction indicator.
3. Stop-with drove.
4. Reversing lamp / rear fog lamp.
Slightly push the lamp socket into the socket, turn counterclockwise, remove and replace the lamp.
Insert the bulb holder into the rear light and secure it with screws. Connect the harness connector. Install the rear light on the tailgate and tighten the mounting nuts. Install the cover and lock the latch.
Turn on the ignition, turn on all the lights and check their operation.
Additional rear lights on the tailgate frame
Open the back door.
Loosen and remove the plastic cover in the side trim panel.
Press down on the lamp housing and remove it from the side trim panel.
1. Rear light.
2. Direction indicator.
Turn the plastic nut counterclockwise and remove it from the lamp holder.
Slightly push the lamp socket into the socket, turn counterclockwise, remove and replace the lamp. Install the plastic nut from the lamp holder by turning it clockwise.
Install the lamp holder to the rear door frame. Close the cover in the side decorative panel.
Visitor comments