Attention. Transportation of people behind a protective partition is prohibited.
Luggage net behind the front seats
Press and lower the rear seat headrests, fold down the rear seatbacks.
Front mounting holes in the roof frame: insert the rod on one side, bend the rod and insert into the hole on the other side.
Install the hooks of the narrow straps into the Top-Tether mounting loops located on the back of the folded rear seatbacks. Install the hooks of the wide straps on the stoppers located on the backs of the rear seats.
Cartridge with luggage net
Pull the net out of the cassette and fix the net rod on one side into the rear mounting hole in the roof frame. Squeeze the rod and fix it on the other side.
Removing the cartridge
Roll up the luggage net.
Remove the trunk lid.
To release the cassette, rotate it back slightly and lift it up from the latches.
Cartridge Installation
Remove the trunk lid.
Insert the cartridge into the holders on the left and right sides. Pay attention to the designations L (left-hand side) and R (Right side), printed on the cassette for ease of installation. Slightly rotate the cartridge forward to secure it.
Storage of protective nets and luggage rack
The rear safety net cassette can be folded together with the luggage rack and the rolled safety net under the boot floor.
Open the luggage compartment floor by pulling the handle. Fold the floor and place it behind the rear seats.
Install the trunk shelf in the cavity with the top side down, while the release lever should be in front at the right edge.
Visitor comments