Luggage compartment

Folding the rear seatbacks

The back of the rear seat consists of two sections. Each of these sections can be folded independently of the other. If you need to remove the trunk shelf from the vehicle, press and hold the latch, then press down on the head restraints. Pull up the rear armrest.



Place the seat belts of the outer seats in the belt guides.

Pull the release lever on one or both sides and fold the seatbacks down onto the seat cushion.



To raise the seatbacks, they must be folded up and placed in an upright position until they click into place. Check that the seat belts of the outer seats are placed in the appropriate belt guides.



The seat backs are locked correctly if the two red markers on the side next to the release lever are not visible.

Attention. You can start driving the car only after the seat backs are securely fixed in their original position. Otherwise, there is a risk of injury, damage to the load or vehicle in the event of sudden braking or a collision.

The center seat belt may lock if the seatback is raised too quickly. To unlock the reel, retract or pull the belt about 20 millimeters and then release it.

Opening the passage in the back of the center rear seat

Fold the rear seat armrest down.



Grab the recess and open the lid.

This position can be used to transport narrow, long loads.

Make sure that when you put the cover back in its original position, it locks into place.



The closed lid can be secured to the side of the luggage compartment. Turn the knob 90°.


If the handle is located horizontally, the cover can be fixed to the side of the passenger compartment. If the handle is vertical, the lid is not secured.

Storage space in luggage compartment

Storage boxes can be located under the trunk shelf, in some trim levels.