The load-dependent brake force regulator is attached to the chassis of the vehicle and connected to the rear suspension of the vehicle by means of a spring.
The car must be on the ground.
Depress the brake pedal firmly and release quickly. In this case, the lever of the brake force regulator must move.
The pressure test of the brake force regulator is carried out using a control device that determines the hydraulic pressure in the hoses. The pressure regulator is checked and adjusted by OPEL specialist workshops.
Installation
Fully press the brake force regulator lever (in the direction of travel) and so move the slightly freed mounting bracket so that the tension spring rests on the plastic supports without play and tension.
Visitor comments