Bumpers — removal and installation

Front bumper

Removing

1. Remove the grille.



2. Loosen the fixing screws.



3. Remove trim panels from below headlights.



4. Loosen and remove the upper bumper mounting screws in the wheel arches.



5. Unscrew and remove the lower mounting screws of the bumper in the wheel arches.




6. Press on the center pin.



7. Remove the plastic rivets.



8. Loosen the top fixing screws.



9. Remove the front bumper.






10. Loosen the fixing screws if necessary (left) and remove the bumper bar (on right).

Installation

Installation is carried out in the reverse order of removal.

Rear bumper (sedan models)

Removing

1. Remove the upper and lower bumper mounting bolts.



2. Loosen the mounting screws and remove the trunk trim panel.




3. Press on the center pin.



4. Remove the plastic rivets.



5. Remove the caps and unscrew the bumper mounting screws.



6. Remove rear bumper






7. Loosen the fixing nuts if necessary (left) and remove the bumper bar (on right).

Installation

Installation is carried out in the reverse order of removal.

Rear bumper (station wagon models)

Removing

1. Loosen the lower fixing screws in the wheel arches.



2. Unscrew the mounting bolts and remove the reflectors from the bottom of the rear headlights.



3. Loosen the fixing screws.



4. Press on the center pin.



5. Remove the plastic rivets.



6. Remove caps.



7. Loosen the fixing screws.



8. Remove the rear bumper.

Installation

Installation is carried out in the reverse order of removal.