Elements of seat belts

Front seat belt and tensioner

Removing

1. Remove the cap.



2. Loosen the bottom fixing bolt.



3. Remove the bottom panel of finishing of an average rack of a body.



4. Remove the anti-theft alarm sensor.




5. Loosen the mounting screws and remove the upper trim panel of the middle pillar.



6. Pull the strap through the trim panel.



7. Remove trim panel.



8. Loosen the fixing screws.




9. Remove the trim panel.



10. Loosen the fixing bolt (indicated by an arrow) and remove the upper belt anchor.



11. Unscrew the fixing bolt of the tension drum and remove the seat belt.

Installation

Installation is carried out in the reverse order of removal.

Rear seat belt and tensioner (sedan models)

Removing

1. Remove trim panel.




2. Loosen the fixing bolt.



3. Press the button and disconnect the center seat belt.

4. Remove the rear seat and backrest.

5. Loosen the bottom fixing bolt.

6. Loosen the upper seat belt mounting bolt.



7. Unscrew the fixing bolt of the tension drum and remove the seat belt.

Installation

Installation is carried out in the reverse order of removal.

Rear seat belt and tensioner (station wagon models)

Removing

1. Remove the center seat belt.

2. Remove the rear seat and backrest.

3. Loosen the bottom fixing bolt.

4. Loosen the upper seat belt mounting bolt.

5. Remove trim panel from C-pillar and luggage compartment wall.

6. Unscrew the fixing bolt of the tension drum and remove the seat belt.

Installation

Installation is carried out in the reverse order of removal.