The power steering system is installed on all models.
Steering wheel — removal and installation Models without an airbag module Removing 1. Set the front wheels straight. 2. Remove the panel in the center of the steering wheel and disconnect the two...
Steering column — removal and installation Removing 1. Disconnect the negative battery cable. 2. Remove the trim panel under the instrument panel. 3. Mark the installation position of the steering...
Steering lock / ignition lock Castle drum Removing 1. Remove the steering wheel. 2. Remove the upper casing of the steering column. 3. Disconnect the connector and remove the immobilizer....
Steering gear — removal and installation Models with 4-cylinder engine Removing 1. Set the front wheels straight. 2. Mark the position of the steering arm in relation to the steering gear. Unscrew the...
Tie rods — removal and installation Removing 1. Remove the front wheels. 2. Loosen the fixing nut. 3. Using a ball joint splitter (left) disconnect the rod from the pivot pin (on right). 4....
Steering arm — removal and installation Removing 1. Disconnect the center tie rod from the steering arm. 2. Unscrew the nut from the bottom of the steering arm bracket and remove the protective...
Power Steering system Pump Models with 4-cylinder engine Removing 1. Remove the drive belt. 2. Disconnect the tube and hose from the pump, unscrew the three fixing bolts and remove the...
Wheel alignment and steering angles Proper front wheel alignment is essential for good vehicle handling and to prevent premature tire wear. Before proceeding to check the geometry of the steering...