Car clutch repair Opel Omega B

All models with a manual transmission have a single-plate, dry clutch, consisting of five main elements: a friction plate, a pressure plate, a diaphragm spring, a casing and a release bearing.

Specifications
Type Single plate, dry clutch with diaphragm spring type, hydraulic clutch release Friction disc Diameter: – Models with 2.0L engine 216 mm – Models with 2.5L...

Hydraulic clutch release drive system
Warning! When bleeding, use only new hydraulic fluid. Before pumping, check all tubes and connections. Bleed valve location The bleed valve is located on the...

Master cylinder — removal and installation
Removing 1. Remove the wiper arms and drain panel. 2. Disconnect the hydraulic hose from the tank. 3. Remove the mounting clip and disconnect the tube from the...

Working cylinder — removal and installation
Removing 1. Remove the gearbox. 2. Remove release bearing. 3. Disconnect the hydraulic pipes from the cylinder, unscrew the fixing bolts and remove the...

Clutch pedal — removal and installation
Removing 1. Remove the trim panel and air pipe under the instrument panel. 2. Remove the pin securing the master cylinder pushrod to the pedal. 3. Disconnect...

Clutch discs — removal and installation
Removing 1. Remove the gearbox. 2. Mark the installation position of the pressure plate on the flywheel. 3. In a diagonal order, gradually unscrew the fixing...

Main malfunctions, their causes and methods of elimination
CAUSE ELIMINATION METHOD Clutch pedal does not return to its original position (on vehicles with hydraulic clutch) Air ingress into the hydraulic drive,...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: