Tightening torques for threaded connections, Nm
- Box cover and clutch disc - 5
- Output shaft flange - 150
- Starter to gearbox
- Diesel vehicles - 40
- Gear shift lever to shift mechanism - 10
- An arm of fastening of a final collector to a collector — 20
- Downpipe to exhaust manifold. V6 engine - 30
- Bracket for fastening the exhaust manifold - 40
- The pressure head pipeline of a drive of coupling - 14
- Master cylinder to bulkhead - 20
- Drive shaft to flange on gearbox. Bolts M12 - 95
- Drive shaft to flange on gearbox. Bolts M10 - 50 + turn by 75°and 15° (bolts must be replaced after each disassembly)
- Gearbox to engine - 60
- Gearbox to engine - 60
- Oil pan for gearbox. Bolts M8 - 20
- Oil pan for gearbox. Bolts M10 - 40
- Gearbox support to the bottom - 45 (bolt heads are cut off and the bolts are lubricated with sealant)
- Support for fastening the gear lever to the bottom - 22
- Ignition coil bracket to cylinder head - 15
- Catalyst - 25
- Shift rod bolt - 10 + 180°and 45°turn (bolt must be replaced after each disassembly)
- Pressure plate to flywheel. Bolts M7 - 15
- Pressure plate to flywheel. Bolts M8 - 28
- Suspension supports - 22
- Suspension mounts to the engine - 60
- Filter and drain plug - 30
- Sensor-switch reversing lights - 20
- Vibration damper - 22
Gear ratios
Visitor comments