Car engine repair Opel Frontera A (petrol)

General information about gasoline engines
The two-door version of the car under the name Frontera Sport has a shortened base and a 2.0 liter engine with 115 hp. (85 kW). The four-door version of the...

Gasoline Engine Specifications
Note. Individual characteristics are also given in the text of the Chapter OHC engines - general data Engine's type: - engine 2.0 l until the middle of 1995...

Removal and installation of the OHC engine
Removing The engine is removed from the vehicle without the gearbox. For this, a mechanism of the appropriate load capacity is used. It is recommended to use...

Removal and installation of the DOHC engine
All instructions regarding the removal and installation of the OHC engine are also valid in this case. The engine is removed from the compartment without the...

Engine disassembly
View of the 2.0L engine from the suction side Engine type 2.4 l (From 24 NE). The engine has a camshaft chain drive Before starting work, thoroughly clean all...

Engine Assembly
Engine assembly is described in the relevant sections. When assembling the motor, the following general instructions must be observed. 1. Before assembly,...

Cylinder head and valves — removal and installation
Removal and installation of a head of cylinders (engine not removed) The cylinder head can be removed with the engine installed. This operation is briefly...

Pistons and connecting rods — removal, inspection and installation
Removing OHC engine Pistons and connecting rods can be removed without removing the engine, for example, to replace any piston or connecting rod bearing. In...

Cylinder block — cleaning and checking
When completely disassembling the cylinder block, carefully clean and remove foreign particles from the cavities and oil channels. Completely remove any...

Crankshaft and crankshaft bearings
Removing the crankshaft The engine must be removed to remove the crankshaft. In the following description, it is assumed that the necessary parts have already...

Camshaft drive — removal, inspection and installation
For ONS and DOHC 2.0L engines, the camshaft has an overhead position and is driven by a toothed belt. However, the toothed belt for different engines has a...

Engine mounts — removal and installation
2.0 L OHC engine up to mid 1995 release Left engine mount Right engine mount Rubber engine mounts are manufactured by various companies. All engine mounts must...

Cylinder compression check
Note. To check if the valves are tight enough when they close, if the piston rings are worn or broken, or if there are other problems in the cylinders, it is...