Removal
1. Remove the rear wheels, unscrew the bolts securing the upper guide of the brake caliper fingers.
2. Unscrew the bolts securing the lower guide of the brake caliper fingers.
3. Fold back the brake caliper.
4. Remove the brake pads on both sides.
5. Check the condition and fastening of the piston dust boots of the wheel cylinders, brake discs.
6. Clean the brake pad guide and caliper.
Installation
7. Move the piston inside the cylinder using the Fre. 1190-01 tool.
8. Install new brake pads, brake caliper, screw in the brake caliper guide pin mounting bolts.
Visitor comments