Removal
1. Remove the steering knuckle.
2. Remove the hub using tools A and B (Fig. 6.13).
Fig. 6.13. Remove the hub using tools A and B.
3. Remove the hub bearing using tools B, C and D (Fig. 6.14).
Fig. 6.14. Remove the hub bearing using tools B, C and D.
Installation
4. Press the hub bearing into the steering knuckle using tools D, E and F, with the ABS wheel sensor target signal toothed disc facing the inside of the steering knuckle (Fig. 6.15).
Fig. 6.15. Press the hub bearing into the steering knuckle using tools D, E and F.
Note: Please pay attention to position the ABS wheel sensor bracket correctly (A = 48°± 5°to the horizontal axis) (Fig. 6.16).
Fig. 6.16. Pay attention to the correct positioning of the ABS wheel sensor bracket (A = 48°± 5°to the horizontal axis).
5. Install the hub using tools B, C and D and install the steering knuckle (Fig. 6.17).
Fig. 6.17. Install the hub using tools B, C and D and install the steering knuckle.
Visitor comments