Removing the top part
1. Unscrew the mounting bolts 1 (Fig. 9.44).
Fig. 9.44. Unscrew the mounting bolts 1.
2. Tilt the light to release it from the clips 3 (Fig. 9.45).
Fig. 9.45. Tilt the light to detach it from the clamps 3.
3. Disconnect the wiring connectors (Fig. 9.46).
Fig. 9.46. Disconnect the wiring connectors: 1A - Power supply for the parking light bulb; 2A, 2B - Power supply for the reversing light bulb (entrance); ZA, ZV - Connection on «mass»; 4A, 4V - Power supply for fog light bulb (entrance); 5A - Direction indicator; 6A - Brake light; 1B, 5B, 6B - Not used.
Removing the bottom part
4. Unscrew the mounting bolts 4 (Fig. 9.47).
Fig. 9.47. Unscrew the mounting bolts 4.
5. Disconnect the wiring connector and remove the light. The assignment of the contacts on the lower part of the rear light is shown in Fig. 9.48.
Fig. 9.48. Assignment of contacts of the lower part of the rear light: 1 - Power supply for the fog light bulb; 2 - Power supply for the reversing light bulb; 3 - Connection to «mass».
Visitor comments