Car doors and windows Opel Vectra B

Doors — removal and installation
Removing 1. The door hinges are welded to the door and pillar. If adjustment is necessary, use special tools to bend the hinges. Open the door and disconnect...

Front door upholstery — removal and installation
Removing 1. Remove the ground wire from the battery. 2. Open the front door and pull out the door mirror adjustment knob. 3. Then, using a screwdriver blade as...

Upholstery of a back door — removal and installation
Removing 1. Remove the ground wire from the battery. 2. Open the rear door and remove the speaker grille. 3. Remove the lower plastic plug from the door...

Internal door handle — removal and installation
Removing 1. Remove the door upholstery and protective film. 2. Push the inside door lock release handle forward to release it from the elongated slots in the...

External handle for opening the front door
Removing 1. Remove the door upholstery and protective film. 2. Lower the glass, remove the seal from the glass guide 3. Unscrew the top screw securing the rear...

External handle for opening the rear door
Removing 1. Remove the door upholstery and protective film. 2. Lower the glass and remove the seal from the rear glass guide. 3. Unscrew screws and remove a...

Front door lock — removal and installation
Removing 1. Remove the door upholstery and protective film. 2. Lower the glass, unscrew the screws and remove the rear glass guide from the door. 3. If...

Rear door lock — removal and installation
Removing 1. Remove the door upholstery and protective film. 2. Remove the outside door handle. 3. Disconnect the lock button rod from the lock, releasing the...

Door window regulator — removal and installation
The location of the windows of the front door 1. Manual window regulator 2. Power window regulator Removing 1. Remove the door upholstery and protective film....

Door glass — removal and installation
Removing 1. Remove the window regulator. 2. Remove the lower outer glass seal, then tilt the front of the glass down and lift the glass out of the door....

Trunk lid — removal and installation
Removing 1. Open the trunk and disconnect the electrical connector from it. 2. Using a marker, mark the position of the hinges on the trunk. 3. Unscrew bolts...

Trunk lid lock — removal and installation
Removing 1. Open the trunk, unscrew the screws and remove the trunk lid trim. 2. Disconnect the lock rod by removing the plastic retainer with a lever. 3....

Trunk lid lock cylinder — removal and installation
Removing 1. Open the trunk and remove the trunk trim. 2. Disconnect the lock rod by removing the plastic retainer with a lever. 3. Unscrew the bolts, then...

Rear door hatchback models — removal and installation
Removing 1. Remove the ground wire from the battery. 2. Open the back door and disconnect the electrical connectors. 3. Disconnect the tailgate washer hose. 4....

Rear door of Universal models — removal and installation
Removing 1. Remove the ground wire from the battery. 2. Open the rear door and unscrew the screws, release the fastening brackets. 3. Remove an upholstery of a...

Tailgate pillars — removal and installation
Removing 1. Open the back door. 2. Using a small screwdriver, remove the spring clip securing the top of the rear door pillar to the ball joint on the rear...

Tailgate lock — removal and installation
Removing 1. Open the rear door and remove the door trim. 2. Disconnect the lock rod by removing the plastic retainer with a screwdriver. 3. Unscrew bolts and...

Tailgate lock cylinder — removal and installation
Removing 1. Open the rear door and remove the door trim. 2. Disconnect the central blocking rod by removing the plastic retainer. 3. Unscrew the nuts (arrows),...

Central locking control unit
Removing 1. Remove the trim from the right front footwell. Release the lock and remove the electrical connector from the control unit. 2. Unscrew the nuts and...

Trunk lock motor — removal and installation
Removing 1. Open the trunk, then disconnect the center lock link from the trunk lock motor. 2. Disconnect the electrical connector from the engine. 3. Unscrew...

Rear door lock motor — removal and installation
Removing 1. Open the rear door and remove the door trim. 2. Disconnect the engine rod from the lock cylinder by removing the plastic retainer with a lever. 3....

Fuel filler neck flap engine
Hatchback and sedan models Removing 1. Open the right side trunk lid and disconnect the electrical connector from the engine. 2. Unscrew two bolts and remove...

Power window switch on the center console
Removing 1. Remove the handbrake lever trim from the center console. 2. Disconnect the electrical connector and, using a screwdriver blade as a lever, remove...

Power window switch on rear door
Removing 1. Using two thin screwdrivers, pry the rear window switch out of the plastic door handle. Remove the speaker grilles and bottom plug. 2. Unscrew...

Power window motor — removal and installation
Removing 1. Remove the window regulator. 2. Unscrew a bolt and remove a regulator from the engine. Installation Installation is made in sequence, return to...