Removal and installation
Engine 1.7L
1. In the car, unscrew the clips and remove the bottom panel from the driver's side.
2. Remove the accelerator cable from the top of the throttle control pedal.
3. Unscrew the nuts and remove the pedal assembly from the bulkhead of the engine compartment.
4. Installation is made in sequence, return to removal.
Engine 2.0L
1. In the passenger compartment, unscrew the fastening clips of the trim on the trim of the lower part of the instrument panel.
2. Remove the trim on the bottom of the instrument panel on the driver's side to access the accelerator pedal.
3. Disconnect the electrical connector from the accelerator pedal position sensor.
4. Unscrew the nuts and remove the accelerator pedal assembly.
5. Installation is made in sequence, return to removal.
Visitor comments