Oil level sensor — removal and installation

1.6L petrol engines

Removing

1. The oil level sensor is located on the back of the oil pan.

2. To access the sensor, lift the front of the vehicle and secure it on stands. Remove the engine mudguard.

3. Drain the engine oil into a clean container and install the oil drain plug, tightening it to the specified torque.

4. Disconnect the electrical connector from the sensor.

5. On engines with a stamped steel pan, unscrew the mounting bolts and remove the sensor together with the gasket.

6. On engines with a cast aluminum sump, unscrew the sensor.

Installation

Installation is made in sequence, return to removal.

Other models

Removing

1. The oil level sensor is located inside the oil pan, which must first be removed.

2. After removing the pallet, disconnect the electrical connector from the sensor.

3. Unscrew the screws and remove the sensor from the oil pan.

Installation

Installation is made in sequence, return to removal. In this case, it is necessary to apply a means preventing the unscrewing of the bolts on the thread of the sensor fastening bolts.