Spare lamps (Opel Vectra B 1995-2002, petrol: Electrical equipment: Lighting and signaling)

A poorly lit car can be costly. In this case, you do not need to immediately think about the worst, about the accident. Insufficient vehicle lighting can cost the driver a warning or a fine. A small stock of the most important lamps will give you the opportunity to immediately eliminate the defect of the lamp «outpatient» on my way. The following lamps are suitable for Vectra models:

Halogen lamp with one filament H 7.55 W, (dipped beam)
Halogen lamp with one filament H 1.55 W, (high beam, fog lamp)
Orange lamp with one filament (drop shape) 21 W, (turn indicators front and rear)
Lamp with one filament (drop shape) 21 W, (brake light, reversing light)
Lamp with two filaments (ball shape) 21/4 Tue, (fog and tail light)
Lamp with one filament (ball shape) 5 W (back light)
Lamp with one filament (ball shape) 10 W (license plate light)

Left: Replacing a low beam headlight bulb: Remove the protective cap from the headlight housing. Squeeze the spring wire clip of the lamp holder and fold it out. Take out the bulb (arrow), disconnect the lamp connector and connect a new lamp.

On right: incandescent lamp replacement (arrow) in the high beam headlight is carried out in the same way as replacing the low beam lamp.

The photo shows a dismantled parking light bulb. When installing, insert the bulb with the cartridge into the hole in the headlight housing and turn the cartridge to the right. Mount the protective cap again.

Tip: before throwing a non-working lamp into the trash, you should carefully examine it. Maybe she is still in order, but cannot burn due to a lack of power supply (loose or oxidized contacts, wire, fuse or lamp socket).

Spare lamps

Visitor comments