Car steering Opel Vectra C

Steering Specifications and Description
Steering type - Rack and pinion, hydraulically reinforced. The main elements of steering are steering wheel with steering column, steering gear with rack and...

Removal and installation of the driver's frontal airbag module
1. The driver's frontal airbag module is built into the capital part of the steering wheel. Please read the safety precautions in Section 1 carefully before...

Removal and installation of a steering wheel
Caution: Before doing any work near the airbag unit, steering column, or instrument panel, disable the SRS to prevent injury from accidental deployment. 1....

Removal and installation of the contact block of understeering switches
1. The right and left steering column switches are combined in the contact block (see chapter «Controls and methods of operation», Section 17 , and Chapter 12,...

Tie Rod Ends — Replacement
1. Set the parking brake, jack up the front of the car and place it on jack stands, the wheels should turn freely. 2. Check the tie rod ends for play by moving...

Removal and installation of anthers of the steering mechanism
1. Remove the appropriate tie rod end ( see Section 15 ), if necessary, remove the engine crankcase protection ( see chapter 2 ). 2. Tighten the locknut (see...

Wheel alignment
General information 1. The geometry of the suspension and its rigidity determine the possibility of limiting the vertical movements of the body and reducing...