Replacing the side mirror of the Zafira model

1. We prepare the car for work (see «Preparing the car for maintenance and repair»).

2. Remove the door trim (see «Upholstery of doors of the Zafira model - removal and installation»).

3. Disconnect the wiring harness block.



4. Remove the connector from the holder.



5. We sink the sealing gum and the connector into the door cavity.



6. Carefully prying with a thin slotted screwdriver...



... remove two plugs from the door pillar.



7. Using the TORX T30 wrench, completely unscrew screw 1 and unscrew screw 2 a few turns.



8. Raise the mirror slightly up and remove it, removing the wiring harness from the door cavity.



9. Install the parts in reverse order.