External and internal lighting control unit

The control unit is located on the left side of the instrument panel and combines a switch for external and internal lighting, an electric headlight corrector, a brightness control for the backlight of control instruments and controls, a rear fog lamp switch and (depending on configuration) fog lights.



1 - switch for outdoor and indoor lighting.

By turning the switch, you can set the following modes:



Pulling the switch towards you turns on the interior lighting (behind closed doors).

2 - brightness control for the illumination of control devices and controls.

By turning the control wheel up or down, you can set the desired brightness of the backlight.

3 - rear fog lamp switch.


The fog lights come on only when the ignition is on and the low beam headlights or fog lights are on.

4 - fog lamp switch.

Fog lamps turn on only when the outdoor lighting is on.

5 - electric headlight corrector.

Designed to remotely change the tilt of the headlight beams in a vertical plane at various vehicle loads.

Warning! Always set the headlight range control to the correct position (see below), as blinding the driver of an oncoming vehicle can have the most serious consequences!

To properly illuminate the road and prevent dazzling drivers of other vehicles, match the mark on the control wheel of the electric corrector with the corresponding marks (figures) on the block with different loading options:

• 0 - one driver or a driver with a passenger in the front seat;
• 1 - driver with four passengers;
• 2 - one driver and cargo in the luggage compartment;
• 3 - driver with four passengers and cargo in the luggage compartment.